Double radial pump

Category:

This model of pumps consists of two piston hydraulic pumps and is produced and assembled according to the following table and according to the needs of the consumer.
*You can refer to the products menu to view other pumps produced by this company that have various volumes.

 

small type

weight

shaft size

max drive power

RPM max

Lit/Min

P max

cm3/rev

model

12.6

17

2.3

1450

1.5

800

1.08

PR 15

12.6

17

2.8

1450

2.5

600

1.8

PR 25

12.6

17

5.7

1450

5

600

3.6

PR 50

12.6

17

8.6

1450

7.5

600

5.4

PR 75

15

22

9

1450

10

500

7

PR 100

15

22

12

1450

13

500

9

PR 130

15

22

14

1450

16

450

11

PR 160

20

24

18

1450

21

450

14.5

PR 230

20

24

24

1450

27

450

19.0

PR 270

20

24

28

1450

32

450

22.2

PR 320

large type

35

30

7.5

1450

10

400

6.89

PR 305

35

30

13

1450

17

400

11.72

PR 308

35

30

16

1450

21

400

14.48

PR 310

40

30

18

1450

28

350

19.32

PR508

40

30

23

1450

35

350

24.14

PR 510

40

30

28

1450

42

350

29.00

PR 512

40

30

32

1450

48

350

33.10

PR 514

44

34

40

1450

60

350

41.4

PR 712

44

34

47

1450

70

350

48.27

PR 714

44

34

41.8

1450

87

250

60

PR 714Ex

Operation guide
1. The hydraulic oil level should always be higher than the pump level.
2. Before connecting the pressure pipe to the system, start the pump for a few moments so that the air inside the pump is completely drained.
3. The pump shaft can rotate in two directions (clockwise and clockwise).
4. A suitable filter should be installed in the oil return circuit to the tank with a pore size of 20 microns and cleaned every 500 working hours.
5. A suitable filter with a 125 micron hole should be installed at the head of the suction pipe inside the tank and cleaned every 500 working hours.
6. Install the air filter on the tank lid and clean it every 200 working hours.
7. The tank lid should be completely sealed to prevent the penetration of dust and pollution.
8. The inside diameter of the oil suction pipe should be one size larger than the diameter of the pump inlet.
9. In case of observing any kind of vibration and abnormal sound in the pump, stop working.
10. Type of oil: use hydraulic oil with an average temperature of 55 degrees.
11. In double oil suction pipe pumps, use independent pipe for each floor.